michal
/
ESPHome_implementation
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'da19f6cf8f'
${ noResults }
ESPHome_implementation/readme.md

2.2 KiB
Raw Blame History

Solareco ESPHome implementation

There is possible to easily promote all values from Solareco regulator, which are served in ascii format via UART on P1BT/LAN connector (baudrate 115200) to your Home assistant assistant server.

ESP8266 (chosed NodeMCU v3) will make a really simple implementation together with ESPHome.

First implementation

Firstly you need to install ESP home to your Home assistant instance. There are multiple ways how to do that, the official is here.

When is your ESPHome extension installed to your home assistant server, connect NodeMCU board via USB to your computer and click on + new device. Fill the name solareco-meter, choose Esp8266 and new card with "solareco-meter" should appear in your ESPHome extension. Click on Edit == code editor will show up. Copy the encryption key, and passwords. Than take example code from src/solareco-meter.yaml, inset all the keys and password you copied from previous step and paste the whole code back to the editor. Than click to Save and Install

After the installation you will see your sensor online, but not serving any data.

Implementation with Solareco HW

To be able to get your data from Solareco, you need to connect already prepared device with the P1BT/LAN pin header.

  • Solareco device having 5V logic on mentioned LAN connector. We will use 5V VCC to power up pur NodeMCU and one extra PNP transistor for level shifting (feel free to use different type of level shifter) of the UART TX signal from 5V to 3V3 which ESP is compatible with. Example of the PNP level shifter:

pnp simple level shifter

    • Connect VCC from LAN connector to VIN pin on your NodeMCU
    • Connect GND from LAN connector to GND pin on your NodeMCU
    • Connect TX from LAN connector to level shifter mentioned earlier and its output to pin D7 on your NodeMCU

All the values from the UART should appear in your Home assistant as a new device. The values are updating every ~15s (possible to set in .yaml file)

sensor otput