ViaStitching 1.3: checks against poured copper, snap grid, skip markers

- clearances checked with exact shapes (round via) against pads, tracks,
  vias, copper drawings, other zones' poured copper and keepouts;
  Rectangular no longer uses square box tests
- Outline follows the poured copper edge, vias on the grid
- same-net pads: only thermal relief gap and hole-to-hole spacing
- optional zone refill before placing vias
- snap grid option (disables Grid Origin choice)
- via group mode: per net, per net and pattern, new group per run
- optional markers of skipped vias on User.Drawings with reason letter
- option to keep vias out of footprint references
- warning when "Only under selected Zone" has no zone of the net selected
- dialog: options in two columns, narrower window
This commit is contained in:
Zdeněk committed 2026-11-16 18:42:58 +01:00
1 parent ae5f101eda
commit bb6815b9b2
6 files changed
+1406 -309

No files matched your search

+17
View File
@@ -50,6 +50,23 @@ ViaStitching.json in the KiCad user settings directory
(~/.config/kicad/10.0/ on Linux); delete this file to get the defaults
back (via drill and clearance from the board design settings).
Options (1.3):
- Vias are checked against the poured copper (not the zone outline) and
the exact shapes of pads, tracks, vias, other zones and keepouts.
"Refill zones" refills all zones before placing vias.
- Pads of the target net only need to keep their thermal relief gap.
- "Snap grid" (mm, 0 = off) puts every via on that grid, counted from
the board Grid Origin.
- "Via group": one group per net, per net and pattern, or a new group
for every run.
- "Mark skipped vias" draws a circle with a letter on User.Drawings
where a via could not be placed: P pad, T track, Z other zone,
K keepout, D copper drawing, F no poured copper, E board edge,
R reference.
- "Skip references" keeps vias out of visible footprint references.
- "Only under selected Zone" warns when no zone of the net is selected.
Then the result should be:
![The result](images/via2.png)