esphome:
  name: solareco-meter
  # friendly_name: SolarEco_meter

esp8266:
  board: esp01_1m

# Enable logging
logger:
  baud_rate: 115200

# Enable Home Assistant API
api:
  encryption:
    key: "<fill_your_encryption_key>"

ota:
  password: "<fill_your_password>"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Solareco-Meter Fallback Hotspot"
    password: "<fill_your_password>"

# global variables for downsampling and enerhy spikes
globals:
   - id: latest_energy_value
     type: int
     restore_value: no
     initial_value: '-1'
   - id: downsample_counter
     type: int
     restore_value: no
     initial_value: '0'

captive_portal:

# There is not possible to have UART read without having custom function in ESPHome,
# but there is a shortcut how to do that for easy applications with UARTDebug log functions
uart:
  baud_rate: 115200
  tx_pin: 15
  rx_pin: 13
  id: uart_2
  debug:
    direction: RX
    dummy_receiver: true
    after:
      delimiter: "\n"
    sequence:
      - lambda: |-
          UARTDebug::log_string(direction, bytes);
          char m[20];
          char p[20];
          int fan = 0;
          int dc = 0;
          int ac = 0;
          int l = 0;
          int solar = 0;
          int required_voltage = 0;
          int voltage = 0;
          int current = 0;
          int power = 0;
          int frequency = 0;
          int temperature = 0;
          int boiler_temperature = 0;
          int pulse_width = 0;
          int energy = 0;
          std::string str(bytes.begin(), bytes.end());
          
          // old PCB data format.... split the data from format (b'M:4 P:1:1 R:0 F:0 U:168 168V 838mA 140W 50Hz 30C 594us 252Wh\n')
          // new PCB data format  (b'M:4:6 P:23:10 F1 DC1 AC0 0L 224S 224U 225V 7068mA 1586W 0:39C 7289us 3014Wh\n')
          if (sscanf(str.c_str(), "M:%s P:%s F%d DC%d AC%d %dL %dS %dU %dV %dmA %dW %d:%dC %dus %dWh", m, p, &fan, &dc, &ac, &l, &solar, &required_voltage, &voltage, &current, &power, &boiler_temperature, &temperature, &pulse_width, &energy ) == 15) {
            // check wrong peaks
            if(id(latest_energy_value) > 1 && id(latest_energy_value) > energy ){
              // new energy value is smaller than old one, no reset because its higher than 1
              return;
            }
            // fill up current energy value
            id(latest_energy_value) = energy;
            id(downsample_counter) += 1;
            // send every 15th sample font not that frequent communication
            if(id(downsample_counter) % 15 == 0){
              // publish the data
              id(SOLAR_fan).publish_state(fan);
              id(SOLAR_dc).publish_state(dc);
              id(SOLAR_ac).publish_state(ac);
              id(SOLAR_l).publish_state(l);
              id(SOLAR_solar).publish_state(solar);
              id(SOLAR_required_voltage).publish_state(required_voltage);
              id(SOLAR_voltage).publish_state(voltage);
              id(SOLAR_current).publish_state(current);
              id(SOLAR_power).publish_state(power);
              id(SOLAR_temperature).publish_state(temperature);
              id(SOLAR_boiler_temperature).publish_state(boiler_temperature);
              id(SOLAR_pulse_width).publish_state(pulse_width);
              id(SOLAR_energy).publish_state(energy);
            }
          }

sensor:
  - platform: template
    name: "SolarEco-Fan"
    id: "SOLAR_fan"
    update_interval: never
    accuracy_decimals: 0
  - platform: template
    name: "SolarEco-DC"
    id: "SOLAR_dc" 
    update_interval: never
    accuracy_decimals: 0
  - platform: template
    name: "SolarEco-AC" # relay, 1 = relay on, 0 relay off
    id: "SOLAR_ac"
    update_interval: never
    accuracy_decimals: 0
  - platform: template
    name: "SolarEco-L"
    id: "SOLAR_l"
    update_interval: never
    accuracy_decimals: 0
  - platform: template
    name: "SolarEco-Solar voltage"
    id: "SOLAR_solar"
    unit_of_measurement: 'V'
    device_class: voltage
    update_interval: never
    accuracy_decimals: 1
  - platform: template
    name: "SolarEco-Required voltage"
    id: "SOLAR_required_voltage"
    unit_of_measurement: 'V'
    device_class: voltage
    update_interval: never
    accuracy_decimals: 1
  - platform: template
    name: "SolarEco-Voltage"
    id: "SOLAR_voltage"
    unit_of_measurement: 'V'
    device_class: voltage
    update_interval: never
    accuracy_decimals: 1
  - platform: template
    name: "SolarEco-Current"
    id: "SOLAR_current"
    unit_of_measurement: 'mA'
    device_class: current
    update_interval: never
    accuracy_decimals: 1
  - platform: template
    name: "SolarEco-Power"
    id: "SOLAR_power"
    unit_of_measurement: 'W'
    device_class: power
    update_interval: never
    accuracy_decimals: 1
  - platform: template
    name: "SolarEco-Temperature"
    id: "SOLAR_temperature"
    unit_of_measurement: '°C'
    device_class: temperature
    update_interval: never
    accuracy_decimals: 1
  - platform: template
    name: "SolarEco-BoilerTemperature"
    id: "SOLAR_boiler_temperature"
    unit_of_measurement: '°C'
    device_class: temperature
    update_interval: never
    accuracy_decimals: 1
  - platform: template
    name: "SolarEco-Pulse with"
    id: "SOLAR_pulse_width"
    unit_of_measurement: 'us'
    device_class: duration
    update_interval: never
    accuracy_decimals: 3
  - platform: template
    name: "SolarEco-Energy"
    id: "SOLAR_energy"
    unit_of_measurement: 'Wh'
    device_class: energy
    state_class: total_increasing
    accuracy_decimals: 1